Descriptions:This kind of hand-held electric Capping Machine is easy to carry and operate, can be easily used to tighten, loose, or spin a variety of screw caps. The adjustable clutch can effectively avoid the cap damage and reduce the wear and tear inside the plug. Once the cap is fully tightened, the machine automatically stops rotating the head that you can cap the next operation.
Main Features:
- Manual Bottle Capper work applicable to a variety of high strength bottle caps apply to the cap direct range of 10-50 mm, a single production capacity of up to 15-30 bottles/min. (depending on proficiency)
- ✔The Capping machines provide better torque accuracy and are more comfortable to use than other hand-held capping machines. Also Hand-held electric Capping Machine easy to carry,
- ✔Adjustable: This electric Capping Machine is an adjustable clutch, can be easily used to tighten, loose, or spin a variety of screw caps.
- ✔Simple to use: The Capping machine is simple to operate. Simply lower the caper down onto the cap to be tightened and give a gentle push down, the machine takes care of the rest. Every step is taken to ensure that your machine is perfectly suited for your specific task, production environment, and the caps and bottles you work with.
- ✔Electric Capper Sealing, 220V (Voltage) 80W (Power) 60hz; Electric Capping (Working Method) Fits Capping Diameter: φ10-φ50MM, Rubber insert: 10 - 20 mm; 20 - 30 mm; 30 - 40 mm; 40 - 50 mm.
Specifications:
Cap diameter 10-50mm
Capping speed 30 bottles/min
Machine weight 1.5kg
Voltage 220V
Connector 14 inch
Clutch 5-25kg 5-35kg adjustable
How to use it?
1. Put Chuck onto the Cap to be tightened
2. Push down switch to active the Capper
3. The Capper starts and tightens the cap
4. The Capper automatically shuts off while reaching the preset torque
Attention:
1.As the above picture shows, if your cap size is different within the range, then you can use the machine directly. If the differences in your cap size are too big, then you will need to change the accessories according to your requirement.
For example, one cap is 15mm, another one is 25mm, then you will need to change the Silicone pad (four white pads showed in the pic). If one cap is 15mm, another one is 35mm, then you will need to change the aluminum head(two silver heads showed in the pic) and the silicone pad as well.
Package Included:
1 Set Electric Screw Capper
